5 x 7 Inch Embroidery Hoop: Design Size, Uses and Machines That Fit

A 5 x 7 inch hoop is used for tote bags, towels, shirt fronts, in-the-hoop zipper pouches. It fits 4 of the 8 common design sizes in our table, from small monograms up to tote bag design sized designs. Larger designs can be split and rehooped, but alignment takes practice and software that supports it.

Manufacturer examples include Brother PE800. 21 machines in our verified product data have a field of at least 5 x 7 inches, starting with the Brother SE1900 at $1,128.95. A machine can use any hoop up to its maximum embroidery field; a larger aftermarket hoop will not let a machine stitch beyond that field, so check the field size before you buy a machine.

A 5 x 7 inch hoop is listed as 130 x 180 mm. Manufacturers name hoops by their maximum stitching area rather than the outside size of the frame, so the physical hoop is larger. Hoop names are rounded, which is why a 5 x 7 inch hoop is usually given as 130 x 180 mm.

The embroidery field is the largest area the machine can stitch in one hooping. Hoop size is the stitchable area of a particular hoop. A machine with a 6 x 10 inch field can use its 4 x 4 and 5 x 7 hoops too, but it cannot stitch a 6 x 10 design with a smaller hoop attached. Always compare the design size, hoop and field together.

For many beginners, yes. 5 x 7 inches covers monograms, patches and small gifts. If you want to embroider tote bags, towels or quilt blocks, a 5 x 7 inch or larger field avoids splitting designs, and it is the most common upgrade reason owners mention.