10 Inch Quilt Block: Cut Sizes, Grids and How Many Blocks per Quilt
A 10 inch finished quilt block is cut 10 1/2 x 10 1/2 inches before sewing, which includes a 1/4 inch seam allowance on every side. It divides evenly into a four patch (2 x 2), 4 x 4 grid, 5 x 5 grid. A 90 x 95 inch queen quilt needs 9 x 10 = 90 blocks with no sashing.
Quilt block sizes are always given as the finished size, the part you see once the block is sewn into the quilt. A 10 inch block is pieced and trimmed to 10 1/2 inches, then loses 1/4 inch on each side to the seams that join it to its neighbors.
What size do you cut the pieces for a 10 inch block?
Most traditional blocks are built on a grid. Divide 10 inches by the number of grid units to get each unit's finished size, then add 1/2 inch for squares or 7/8 inch for two-at-a-time half square triangles. Grids marked "awkward" land between eighth-inch marks on the ruler.
| Grid | Unit finishes at | Cut squares | Cut HST squares | Ruler friendly |
|---|---|---|---|---|
| Four patch (2 x 2) | 5 in | 5 1/2 in | 5 7/8 in | Yes |
| Nine patch (3 x 3) | 3.333 in | awkward | awkward | No |
| 4 x 4 grid | 2 1/2 in | 3 in | 3 3/8 in | Yes |
| 5 x 5 grid | 2 in | 2 1/2 in | 2 7/8 in | Yes |
| 6 x 6 grid | 1.667 in | awkward | awkward | No |
How many 10 inch blocks do you need for each quilt size?
Blocks across and down are rounded to the nearest whole block, so the finished top lands close to the typical quilt size. Sashing is the strip of fabric between blocks; with 2 inch finished sashing you need fewer blocks for the same size.
| Quilt | Typical size | No sashing | Top size | With 2 in sashing | Top size |
|---|---|---|---|---|---|
| Baby | 40 x 40 | 4 x 4 = 16 | 40 x 40 | 4 x 4 = 16 | 46 x 46 |
| Crib | 36 x 52 | 4 x 5 = 20 | 40 x 50 | 3 x 5 = 15 | 34 x 58 |
| Lap | 45 x 60 | 5 x 6 = 30 | 50 x 60 | 4 x 5 = 20 | 46 x 58 |
| Throw | 50 x 65 | 5 x 7 = 35 | 50 x 70 | 4 x 6 = 24 | 46 x 70 |
| Twin | 68 x 90 | 7 x 9 = 63 | 70 x 90 | 6 x 8 = 48 | 70 x 94 |
| Twin XL | 68 x 95 | 7 x 10 = 70 | 70 x 100 | 6 x 8 = 48 | 70 x 94 |
| Full / Double | 83 x 90 | 8 x 9 = 72 | 80 x 90 | 7 x 8 = 56 | 82 x 94 |
| Queen | 90 x 95 | 9 x 10 = 90 | 90 x 100 | 8 x 8 = 64 | 94 x 94 |
| King | 106 x 95 | 11 x 10 = 110 | 110 x 100 | 9 x 8 = 72 | 106 x 94 |
| California King | 102 x 99 | 10 x 10 = 100 | 100 x 100 | 9 x 8 = 72 | 106 x 94 |
Make a test block first
Sew one block and measure it before cutting fabric for 90. If it comes out 1/8 inch small, your seam allowance is slightly wide, and that error would add up to inches across a quilt. A scant 1/4 inch seam usually fixes it.
Tools for cutting and squaring 10 inch blocks
Olfa 60mm Ergonomic Squeeze-Handle Rotary Cutter RTY-3/DX
$26.49Cuts several layers of fabric at once, which speeds up cutting dozens of identical squares.
Check price
Creative Grids 12-1/2 x 24-1/2 Rectangle Quilt Ruler
$55.99Long grippy ruler for cutting strips to the exact width before subcutting squares.
Check price
Olfa 17 x 17 Rotating Cutting Mat RM-17S
$100.98A rotating mat lets you trim all four sides of a block without moving the fabric.
Check pricePrices change often, so confirm on Amazon. As an Amazon Associate we earn from qualifying purchases.
Frequently asked questions
What is the unfinished size of a 10 inch quilt block?
A 10 inch block is the finished size, measured after it is sewn into the quilt. Before that, it measures 10 1/2 x 10 1/2 inches, because each edge carries a 1/4 inch seam allowance that disappears into the seams. Trim blocks to exactly 10 1/2 inches with a square ruler before joining them so the rows line up.
How many 10 inch blocks do I need for a queen quilt?
A 90 x 95 inch queen quilt takes 9 blocks across and 10 down, 90 blocks in total, for a finished top of 90 x 100 inches. With 2 inch sashing between blocks you need 64 blocks. A border reduces the count further, so plan the layout before you piece every block.
What size squares do I cut for a 10 inch nine patch?
A 10 inch block does not divide evenly into thirds on a standard ruler: each square would finish at 3.333 inches. Choose a four patch (2 x 2) for this block size, or change the finished block to a multiple of 3 such as 9 inches.
What size half square triangles go in a 10 inch block?
In a four patch layout, each half square triangle finishes at 5 inches, cut from squares of 5 7/8 inches using the two-at-a-time method (or 6 inches if you prefer to trim). A nine patch grid does not divide this block cleanly, so four patch or 4 x 4 layouts work better.
How much fabric do I need for 10 inch nine patch blocks?
Because a 10 inch block does not divide into thirds on the eighth-inch ruler, a true nine patch is impractical at this size. Use the quilt top yardage calculator with the grid that suits your block, and add about 10 percent for trimming and mistakes.
Is 10 inches a good quilt block size?
10 inches is a flexible block size that shows off piecing without becoming fiddly. A queen quilt needs 90 blocks, which is a satisfying project rather than a marathon. Smaller blocks need accurate 1/4 inch seams, since tiny errors add up across many seams.
How we research: we compare manufacturer specifications, owner manuals, published standards and recurring themes in verified owner reviews. We do not test products in person, and this is researched guidance, not professional advice. Follow your machine manual and pattern, and take care with rotary cutters, hot irons and needles. As an Amazon Associate we earn from qualifying purchases.